Beddelaha soo noqnoqda ee taxanaha SCK300 Sawirka

SCK300 taxane ah beddelka soo noqnoqda

Sharaxaad Gaaban:

●Shiinees iyo Ingiriisi LCD soo bandhigid, fududahay in la rakibo oo laga saaro;

● qaabdhismeedka ballaaran ee Japan, xajmiga alaabtu waa weyn yahay, waxaa loo isticmaali karaa waqtiyada cimilada kulul;

●shaqada la socodka xawaaraha, waxay noqon kartaa codsi fiican ee taageeraha bilowga labaad;

●waxa uu samayn karaa 220V,380V,ama 220/380 iyo danab kale;

● oo leh wareeg gaaban, dhul-dhigid iyo ilaalin kale:

●wuxuu ku dari karaa kaarka kantaroolka sayid/addoon, kaarka ballaarinta isgaarsiinta, kaarka PG;

●matoo aan isku mid ahayn, matoor isku mid ah oo ikhtiyaari ah;

Email noogu soo dir

Faahfaahinta Alaabta

sifooyinka alaabta

Soo-saareyaasha calaamadaha dhijitaalka ah ee gaarka ah (DSP) ee ugu dambeeyay moto-control oo leh inta jeer ee saacada gaadhaysa ilaa 150Hz ayaa la qaatay.

Matoorada isku midka ah iyo kontoroolka matoorada isku midka ah ee magnet-ka joogtada ah ayaa la taageerayaa, iyadoo si toos ah loo hagaajinayo.Laba muuqaal oo matoor oo madax-banaan ayaa la qorsheeyay, iyo wareejinta labada matoor ee kontoroolka waxaa lagu xaqiijin karaa dejinta cabbirka ama gelida terminaalka.

Qaabka V/Fcontrol saxda ah ee saxda ah ee kontoroolka xaddidan ee hadda jira ayaa hubiya in aysan jirin cillad hadda jirta iyadoo aan loo eegin darawallada ay ku socdaan dardargelinta/deceleration, ama heerka rotor quful, si fiican u ilaalinaya darawallada.h habka xakamaynta vector, qunyar socodka kontoroolka xaddidan wuxuu ballan qaadayaa awood xoog leh ama dhexdhexaad ah oo u hoggaansan shuruudaha codsiga, ilaalinta mashiinnada si fiican.

Habka kontoroolka ee V/F, soo noqnoqda wax soo saarka iyo korantada goynta ayaa loo dejin karaa siday u kala horreeyaan ft ee codsiyada, sida ilaha tamarta soo noqnoqda ee doorsooma, matoorrada qulqulka, iwm.

Habka xakamaynta	Bilaabida qulqulka	Xawaaraha kala duwan	Xawaaraha saxda ah	Jawaabta Torque
V/F xakamaynta	0.5Hz180%	1:100	± 0.5%
Xawaaraha-dareen-la'aanta xakamaynta 1	0.5Hz 180%	1:100	± 0.2%	<10ms
Xawaaraha-dareen-la'aanta xakamaynta 2	0.25Hz 180%	1:200	± 0.2%	<10ms
Xakamaynta dareemaha xawaaraha	OHz200%	1:1000	± 0.02%	<5ms

Gelida awooda

Voltage gelinta la qiimeeyay	gelinta hadda la qiimeeyay	Soo noqnoqoshada	Kala duwanaanshaha danabka la oggol yahay
3-waji 380VAC/400VAC/415VAC 440VAC/460VAC/480VAC	Eeg shaxda “Modeland xuduudaha farsamada ee taxanaha SCK300'	50HZ/60Hz, dulqaad ± 5%	Isbeddelka korantada ee isku xigta ± 10%, gaaban isbedbedelka-15%~10% ie.323V~528V Heerka korantada ee dheelitirka ka baxsan: <3%,THD ayaa buuxinaysa Heerarka IEC61800-2

Wax soo saarka tamarta

Matoorka lagu dabaqi karo	Hadda la qiimeeyay	Korontada wax soo saarka	Inta jeer ee wax soo saarka	Awoodda culeyska oo ka badan
Eeg shaxda "Model iyo cabbirada farsamada ee SCK300ceriau.F	Eeg shaxda "Model iyo cabbirada farsamada ee SCK300 taxane"	3-waji: 0-lagu qiimeeyay danab gelin, qalad ka yar ± 3%	0.00HZ-600Hz Xallinta 0.01HZ	150% 1 daqiiqo: 180% 10s;200% 0.5s. hal mar 10kii daqiiqo.

Tilmaamaha xakamaynta

Qaabka Kontoroolka	V/F xakamaynta	Dareemka xawaaraha xakameyn yar 1	Soeed-sensor xakameyn yar 2	Xakamaynta dareemaha xawaaraha xakameynta booska
Bilaabida qulqulka	0.5Hz180%	0.5Hz180%	0.25H180%	0Hz 200%
Xawaaraha kala duwan	1:100	1:100	1:200	1:100
Saxnaanta xawaaraha	± 0.5%	± 0.2%	± 0.2%	± 0.02%
Xawaare xawli ah	-	± 0.3%	± 0.3%	± 0.1%
Xakamaynta Torque	NO	NO	Haa	haa
saxnaanta Torque	-	-	± 7.5%	± 5%
Jawaabta Torque	-	<10ms	<10ms	<.5ms
Meelaynta saxsanaanta	-	-	-	±1 garaaca xariiqda ± 1

Hawlaha aasaasiga ah

Soo noqnoqoshada bilow	0.00Hz-600.00Hz
Waqtiga Accel/Decel	0.00s-3600aad
hufnaanta qaadaha	1.0KHz~ 15.0KHz
Habka caadiga ah ee amarka	Dejinta dhijitaalka ah +Keypad Kor/Hoos: Dejinta dhijitaalka ah+Terminal Kor/Hoos. Dejinta isgaarsiinta.Analogsetting: All/AI2/AB.Deegaanka garaaca wadnaha ee dhamaadka ah.
hababka bilow	Ka bilow soo noqnoqoshada.Biriinka duritaanka DC bilowga;Duulimaad bilow
Hababka joojinta	Ramp si aad u joojiso.Xeebta si loo joojiyo.Biriinka DC-ga ee joogsiga sare.
Awooda biriiga firfircoon	Cutubka bareegga ee kiciyey danab:650-750V.Waqtiga adeegga: 0.0-100.0s.Qaybaha biriiga ee SCK300G3-037iyo wax ka hooseeya areopti kaliya waa la dhisay.
Awooda bareegga DC	biriijka DC inta jeer ee bilawga ah: 0.00-600.00Hz.Biriinka DC ee hadda: kac torque 0.0 ~ 100% DC wakhtiga braking:0.0-100s.
Gelida marinnada	Siddeed goobood oo wax gelinta beddela, hal teerminal gelinta garaaca wadnaha xawaarihiisa sareeyo.Taageero qanjidhada qalalan, PIP firfircoon, qaabka wax gelinta NP;Laba terminal analog ah, mid ka mid ah waxa loo isticmaali karaa oo kaliya sida galinta danab ka kalena waa ikhtiyaari.
terminal wax soo saarka	Mid ka mid ah wax soo saarka garaaca garaaca xawaaraha sare (0-50kHZ labajibbaaran wax soo saarka iyo laba analog ah (Voltage/programmerable hadda) waxay soo saari kartaa calaamadaha sida soo noqnoqda amarka, inta jeer ee wax soo saarka, iwm mid ka mid ah wax soo saarka dhijitaalka ah.Laba wax soo saarka gudbinta.
Terminalka gelista Ercode	Taageer 5V/12V heerka danab.Taageer OC riix-jiid.calaamado kala duwan wax gelinta iyo sida.

Deegaanka

Garoonka	Dhererka	Heerkulka	Qoyaanka	Gariir	Kaydinta heerkulka
Albaabada gudaheeda, ma jiro iftiin cad oo toos ah, siigada xorta ah, daxalaysa gaasas.gaas ololaya. ceeryaamo saliid,watervapo-, biyo dalagga, milixda, iwm.	0m-2000m: qiime dhimis 1% 100m kasta marka ay ka sarreyso 1000 mitir.	-10C-+40℃ 40℃ ~ 50℃ lagu qiimeeyay wax soo saarka hadda de- qiimaha 1% 1℃ kasta.	5%-95% shuruud la'aan dareen.	In ka yar 5.9rrls2 (0.6g)	-40℃-+70℃

Sharaxaada SCK300 kontoroolka shaqada

Qaybta	Gelida Analog
Terminalka	Magacaabidda Terminalka	Tilmaamid
+10V	Gelida Analog danab tixraac	Voltage: 10.3V± 3% Wax soo saarka ugu badan ee hadda: 25mA.ad caabbinta potentiometer dibadda waa inay ahaataa in ka badan 4000
GND	Analog dhulka	Ka go'doon COM gudaha ly
AI2	Gelitaanka Ana log 2	Korontada iyo hadda waxay noqon karaan 0-10V/0-20mA, kaas oo lagu beddeli karo dariiqa J4. Input impedance: gelinta danabku waa 20kΩ, gelinta hadda waa 500kQ Xallinta: Marka 10V u dhiganto 50Hz, xallinta ugu yar waa 5mV Cilad ±1%,25°C
A13	Gelitaanka Ana log 3	-10V ~ 10V danab Input impedance: 20kO at galinta danab Xallinta: Marka 10V u dhiganto 50Hz.xalinta ugu yar waa 5mV Cilad ±1%,25°C

Qaybta	Gelida Analog
Terminalka	Magacaabidda Terminalka	Tilmaamid
AO1	Wax soo saarka Analog 1	0mA-20mA;impedance200-500Ω.0-10V: impedance>10kΩ2. 0mA-20mA;gelinta impedance 500Q, gelinta ugu badan ee hadda jirta 25mA. Ku beddel J1 dusha kontoroolka si aad u booddo inta u dhaxaysa0 ~ 20mAand0 ~ 10V. Factory default: 0-10V.
AO2	Wax soo saarka Analog 2	0mA ~ 20mA: impedance200 ~ 500Ω.0 ~ 10V: impedance>10kΩ. 0mA-20mA; impedance input 50002. gelinta ugu badan ee hadda jirta 25mA. Ku beddel J2 sabuuradda kantaroolka si aad u booddo inta u dhaxaysa 0-20mA iyo 0-10V.Warshada caadiga ah 0-10V.
CND	Analog dhulka	kasoo xigtay COM Interior ly

Sharaxaada SCK300 kontoroolka shaqada

Qaybta	Terminalka	Magacaabidda Terminalka	Tilmaamid
Digital wax soo saarka	DO1	wax soo saarka furan	kala duwan ee danab:0-24V	Qiyaasta hadda:0-50mA
Digital wax soo saarka	HDO	soo-uruxiyaha furan dibadda/ka saar	Wax soo saarka ururiyaha furan: la mid ah DO1	Wax soo saarka garaaca wadnaha: 0 ~ 50KHz
Soo saarista gudbin	RO1A/RO1B/RO1C RO2A/RO2B/RO2C	Laba qaybood oo ah wax soo saarka gudbinta	RO1A dhamaadka guud.RO1B caadi ahaan wuu xidhan yahay.RO1C caadi ahaan wuu furan yahay RO2A dhamaadka guud.RO2B caadiyan wuu xidhan yahay.RO2C had iyo jeer waa shid	Awoodda xidhiidhka: 250VAG3A.30VDC1A.

Qaybta	Gelida Analog
Terminalka	Magacaabidda Terminalka	Tilmaamid
+24V	+24V	24V± 10%, oo ka go'an GFNID inter iorly Culayska ugu badan 200mA
PLC	Gelida dhijitaalka ah terminaalka guud	U beddelo inta u dhaxaysa heerka sare iyo heerka hoose. Gaaban-wareegaya ± 24V marka la keenayo. qiimo hoose ee irput dhijitaalka ah oo ansax ah, galitaanka tamarta dibadda.
COM	+ 24V dhulka	Ka go'doon GNID gudaha
S1-S8	Gelitaanka dhijitaalka ah 1-8	Gelida:24VDC.5mA Inta u dhaxaysa inta jeer:0-200Hz Qiyaasta korantada: 10-30V
HDI	Galinta dhijitaalka ah/Pulse gelinta	Qiyaasta korantada: 10-30V Wax gelinta dhijitaalka ah: la mid ah S1-S8 Gelida garaaca wadnaha: 0.1 ~ 50kHz;

Qaybta gory	Terminal 485 interface	Keypad 485 interface
Terminalka	Magacaabidda Terminalka	Tilmaamid
485+	Calaamadaha kala duwan 485+	Heerka: 1200/2400/4800/9600/19200/38400/57600bps Masaafada ugu badan: 500m (isticmaal fiilada shabakada caadiga ah)
485-	Calaamadaha kala duwan 485-
GND	485 dhulka gaashaanka u daruuray isgaarsiinta	oo laga soo xigtay COM inter iorly

SCK300 -ining jaantuska 380V AC Drive-hal-waji ah

Guud ahaan iyo cabbirka rakibidda

Qaabka	Muuqaalka taxanaha SCK300 iyo cabbirrada rakibidda (mm) cabbirka dulucda iyo kor u qaadista cabbirrada
	W	WI	H	H1	D	D1	Φ
SCK300 G3-0D75	108	96	134	118	149	140	5
SCK300 G3-1D5
SCK300 G3-2D2
SCK300G3-004
SCK300 G3-5D5/P3-7D5	180	167	240	228	214	205	5.5
SCK300G3-7D5/P3-011
SCK300 G3-011/P3-015
SCK300G3-015/P3-018	225	200	354	330	211	205	6
SCK300G3-018/P3-022
SCK300G3-022/P3-030
SCK300G3-030/P3-037	240	165	450	433	236	230	7
SCK300 G3-037/P3-045
SCK300 G3-045/P3-055	240	160	560	545	331	321	7
SCK300 G3-055/P3-075
SCK300G3-075/P3-090	270	195	640	617	378	368	10
SCK300G3-090/P3-110
SCK300 G3-110/P3-132
SCK300G3-132/P3-160	352	220	800	777	418	408	10
SCK300 G3-160/P3-185
SCK300G3-185/P3-200	360	200	940	912	494.5	484.5	17.5
SCK300G3-200/P3-220
SCK300G3-220/P3-250
SCK300G3-250/P3-280	370	200	1140	1112	575.5	565.5	17.5
SCK300G3-280/P3-315
SCK300 G3-315/P3-350	400	240	1250	1222	560	550	17.5
SCK300G3-350/P3-400
SCK300 G3-400/P3-450